Firmware versions ----------------- DCI Accelerator (1.0) 2.114.11.0_39.3 Cine4k 1.0.30.15-4.5.0-1.14.18 Fuze (gen4) 1.0.35.5-2.14.0-1.14.18 Clipster (gen4) 1.0.35.5-6.0.0-4.11.0-1.14.18 DCI Accelerator (2.0) 2.1.13.15_2.0.19 VeniceII 4.3.0.22_4.0.20 VeniceIII 7.5.0.8_7.1.0 Pronto4 4.3.0.26_4.0.22 Pronto4HDMI 7.4.0.23_7.0.10 Pronto4K 11.1.0.2_11.0.1 Changes 3.2.1.8 --------------- Fixed: - VAMC: Fixed potential problem with vamc files without audio. Changes 3.2.1.7 --------------- Fixed: - Fixed rare audio resync issue during high server load - FIMS: Fixed crash when starting/stopping FIMS queue frequently - FIMS: Fixed issue regarding job status at the end of jobs - FIMS: General stability improvements Added: - Added auto cleanup for FIMS job queue - Fileformats: Added quality setting to the file format "MPEG-2 video -> MXF" so that video quality can be adjusted from outside, e.g. through GUI. Changes 3.2.1.6 --------------- Added: - Added configuration option to force a new clip name after single clip ingest and transform. Improved: - VENICE GUI does not accept unsupported ingest settings with both clip chunking and proxy generation active - VENICE GUI: Metadata config tab now contains an explanation instead of being empty Changes 3.2.1.5 --------------- Fixed: - ClipChunking settings had no effect for a record, if clip chunking was setup after all other settings (destination etc.). - FIMS: Changes to the audio channel count were sometimes ignored. - DVSWS: Added queryFreeDiskSpace request, to get free, used and available disk space in bytes. - FIMS Transform: Added support for sourceAtom (Timecode settings only). - FIMS: If no audio format is specified, no audio will be recorded; if the destination format requires audio, the job will fail. - Added new presets for capture and transform destination settings. These presets are part of the project. - Added new AudioRouting presets for capture, playout and transform. These presets are part of the project. - MOV: Added multi-destination support for QuickTime. Changed: - MOS: Changed behaviour of roCtrl PLAY/EXECUTE/SHUTTLE command: when at the end of a playing block automatic wrap-around is now disabled. - AudioRouting configuration: Reset to default now mutes all excess output channels. Improved: -MXF: Improved general MXF essence multiplexing. Changes 3.2.1.4 --------------- Fixed: - Fixed reporting of channel state (caused wrong display in VeniceView). Changed: - MXF (OP1a): Timecode gaps are not written in footer partition by default. This can be modified in avus.ini (ignoretcgap option). Improved: - Improved how aspect ratio is saved in project settings. Previous version could produce aspect ratios close to the real aspect ratio (1.78 instead of 16/9=1,777...). That could have caused a slight scaling applied in some cases. Changes 3.2.1.3 --------------- Fixed: - Fixed wrong scaling when switching from playout mode to transform mode with different raster. - Fixed 'dvslogwatch collect' on RHEL 5. Added: - MOV: Added read support for QuickTime Movies containing self-contained url data references. Improved: - MXF: Improved XDCamHD422 (RDD09) compatibility. - VDCP: Improved check of selected VDCP path. Updated: - General: logwatch version 1.0.14 Changes 3.2.1.2 --------------- Fixed: - MXF: Fixed transwrapping error for XDCamHD (MPEG2 Long GOP) with in-/outpoint. Changes 3.2.1.0 --------------- Fixed: - MXF: Fixed MXF OPAtom XDCamHD reading issue. - Fixed DVS WS wsdl delivery per http://[IP]:[port]/dvsws?wsdl - MOV: Fixed calculated duration capacity for QuickTime. - Loading a group with channels set to ingest now has the channel tabs correctly set to Ingest mode, not playout mode. Added: - MXF: Added reading support of ANC data from MPEG stream. - Network: Unified configuration for VENICE, VENICE Play and Spycer. - GUI: Added a dialog to ask the user to reset transcode list clip speeds to 100% before - MOV: Added support for alternate interpretation of proprietary 'ACLR' image description extension as YUV Range (set aclr_interpretation=2 in avus.ini to enable). Changed: - FIMS: Omitted values are set to defaults for every new job. A query will always report all used values (including the unspecified ones). - FIMS: Improved error messages for wrong values and technical attributes. Improved: - VDCP: Improved VDCP cue-up. - MXF: Improved duration calculation for growing files (MXF OP1a). Changes 3.2.0.35 ---------------- Fixed: - Minor fixes Changes 3.2.0.33 ---------------- Fixed: - Fixed invalid XML in MOS: dvs:roReadyToAir had two : instead of one. - Fileformats, XDCamEX: Fixed the issue, that encoded material does not have fixed GOP size. - GUI: Fixed a problem where playout did not stop after loading new clip. Changes 3.2.0.30 ---------------- Fixed: - Minor fixes Added: - VDCP: Added support for "analog" audio output for speed -1 to +1 for VDCP slave mode. Improved: - VDCP: Buffer size can now be adjusted and raised to cover longer file system failures Changes 3.2.0.29 ---------------- Fixed: - Minor fixes Improved: - VDCP: speed up VDCP initial startup and responsiveness Changes 3.2.0.28 ---------------- Fixed: - Veniceserver / FIMS: Fixed that it was possible to queue two jobs for the same time - if one job was infinite. - VDCP: Prevent race condition between VDCP cue-up and playback ("Could not load VDCP clip"). - VDCP: Fixed rare issue when turning VDCP mode off and on again. Changed: - VDCP: if a vamc is deleted externally (that is not by VDCP command), then the essence file is deleted too. Exception: if more than one file could be mapped to the vamc, then no file is deleted Improved: - LXF: General reader improvements. - VDCP: Using lock files to prevent multiple writes of vamc files Changes 3.2.0.27 ---------------- Fixed: - Minor fixes regarding FIMS Changes 3.2.0.26 ---------------- Fixed: - Minor fixes Added: - MXF: Added growing MXF (MPEG2 Intra 100mbps) files duration estimating. - LXF: Added growing LXF files duration estimating. Changed: - VDCP: Refresh duration for growing files and update vdcp list. - VDCP: Improved cue with data behavior. Forbid cueing behind outpoint. Changes 3.2.0.25 ---------------- Fixed: - Minor fixes Changes 3.2.0.24 ---------------- Fixed: - Minor fixes Changes 3.2.0.23 ---------------- Fixed: - Minor fixes Changes 3.2.0.22 ---------------- Fixed: - Minor fixes Changes 3.2.0.21 ---------------- Added: - VDCP: RecordInitWithData is now supported. - VDCP: Stop the timecode returned by the VDCP PositionRequest command if the video is not processed correctly. Changes 3.2.0.20 ---------------- - MXF: Enabled write chache in avus.ini by default for improved performance. Changes 3.2.0.19 ---------------- Fixed: - Minor fixes Added: - VDCP: In VDCP slave mode the "RMT" button is disabled to prevent accidentally leaving slave mode. If you must leave slave mode, press Ctrl+Shift+A to enable the button. Changes 3.2.0.18 ---------------- Fixed: - MOV: Fixed issue, that playback seems to jump back or shows a black frame due to illegal/unwanted MPEG-2 start codes, behind the framedata. Improved: - VDCP: Improved generic TC offset handling in VDCP slave mode. Changes 3.2.0.17 ---------------- Fixed: - VDCP: Modification of default clip length in avus.ini now correctly handled on VAMC generation. Improved: - MXF: Improved decode start of MPEG2 intra only 100Mbps. Changes 3.2.0.16 ---------------- Fixed: - Minor fixes Added: - Added firmware check on connect. - Added firmware display (current and recommended) in about dialog. Changed: - MXF: OP1a MPEG2 422@HL intra 100Mbps performs CBR encoding. Changes 3.2.0.15 ---------------- Fixed: - MXF: Fixed Avid OPAtom files reading issue Changes 3.2.0.14 ---------------- Fixed: - VDCP: Removed potential log-spamming. - Fixed problems with XDCAM EX and playout while ingest. - Avid: Ingests longer than 2 hours were not properly written to AAF File. - Veniceserver / FIMS: Fixed possible problems with gSOAP generated classes. Added: - MXF: Added write support for HDF01/02/03. - MXF: Added write support for OP1a MPEG2 intra 100Mbps. - MXF: Added write support for generic op1a IMX. Improved: - MOV: Added best effort read support for QuickTime files carrying a zero-entry sync sample table. Changes 3.2.0.13 ---------------- Skipped Changes 3.2.0.12 ---------------- Skipped Changes 3.2.0.11 ---------------- Fixed: - Minor fixes - Fixed aspect ratio handling via MOS. - Fixed potential problem with VDCP ingest. Changed: - Changed default auto scale setting to box. Changes 3.2.0.10 ---------------- Skipped Changes 3.2.0.9 --------------- Fixed: - Minor fixes Changes 3.2.0.8 --------------- Fixed: - Minor fixes Changes 3.2.0.7 --------------- Fixed: - Minor fixes Changes 3.2.0.6 --------------- Fixed: - Minor fixes Changes 3.2.0.5 --------------- Fixed: - Minor fixes Changes 3.2.0.4 --------------- Fixed: - Minor fixes Added: - MOV: Added read support for QuickTime files with DV/AVCI multi-essence video tracks. - VDCP: Updated clips get (re)added to the "IDS ADDED" list so a controller is triggered to update its information about this clip. Changed: - VDCP: The avus.ini options 'suspend' and 'vdcp_cue_up' are now activated per default. - Activated new license venice playout Changes 3.2.0.3 --------------- Fixed: - Minor fixes Updated: - VENICE control web service (venicecontrol) is now deprecated and may be removed in future versions. Changes 3.2.0.2 --------------- Fixed: - Minor fixes Added: - AB group support for VENICE Play - MOV: Added read support for QuickTime files with long-GOP essences using multiple sample description entries indicating the same format. - MOV: Added avus.ini switch 'skip_audio_at_speed_ge', that allows QuickTime to skip the loading of audio, when speed factor exceeds this threshold. - MOV: Added read support for a wider variety of QuickTime files with multi-essence video tracks. - Added force disconnect feature in website Improved: - MOV: Added best effort read support for QuickTime files carrying a zero-entry sync sample table. Changes 3.2.0.1 --------------- Fixed: - Minor fixes Changes 3.2.0.0 --------------- Fixed: - Minor fixes - MOV: Fixed inaccurate time code sample description being written for high-frame-rate QuickTime files. - Force a scan of each clip when loading a project. This fixes a problem with no audio played for P2 OpAtom files. Added: - MOV: Added transwrapping support to QuickTime Native Reader/Writer - MOV: Added support for DNxHD 444 in QuickTime. - Edittool: Added playout speed button on PM request. Improved: - Enabled transwrapping of DNxHD 444 video essences. - MOV: Improved handling of duration limits while writing QuickTime files to take video frame rate into account. - MOV: Improved accuracy of time scale selected for writing high-frame-rate QuickTime files. - MOV: Native Reader now has improved fast forward/backward and scrubbing behavior of QuickTime XDCam (XDCamHD, IMX, ...) files - MOV: Now importing ProRes 4444 QuickTime files as head range by default. - MOV: Improved disk I/O performance while reading large QuickTime files with single-sample time code tracks. - MOV, VDCP: Native Reader now has improved fast forward/backward and scrubbing behavior of QuickTime XDCam (XDCamHD, IMX, ...) files Updated: Changes 3.1.0.0 --------------- Fixed: - Minor fixes Added: - Added multi file selection from spycer file browser - - Improved activity indication in channel tabs and showcase overview