Changes 3.1.1.11 ---------------- Fixed: - Agent: fixed wrong filename reported in copy report on read error. - General: fixed graceful stop of SpycerAgent and Webservice during reboot and shutdown on Linux. Improved: - Webservice: Enable Soap message logging as default. Existing installations have to adjust "SoapMessageLogging" /etc/opt/DVS/Spycer/Webservice.conf to "true" - Webservice: populate internal state RTPaused as paused to webservice clients. Explain JOBSTATUS_PAUSED and JOBSTATUS_UNKNOWN in webservice documentation. Added: - Webservice: New flag for JobCopy command to force or disable copy-while Changes 3.1.1.10 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.1.9 --------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.1.8 --------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.1.7 --------------- Fixed: - General: Minor fixes and improvements. Improved: - Webservice: Improved response behaviour on parallel identical browse-based commands for AVID workflow Changes 3.1.1.6 --------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.1.5 --------------- Fixed: - MXF: Fixed AS11 Descriptive Metadata reading error. Improved: - Webservice: Improved response behaviour on parallel identical rescan jobs - Webservice: Improved response behaviour on parallel identical browse-based commands Changes 3.1.1.4 --------------- Added: - Webservice: new IsComplete metadata within the NewMetadata list of ContentGetPropertiesResponse for indicating if a file is not growing anymore. Possible values are "Complete", "Incomplete" or "Unknown". Changes 3.1.1.3 --------------- Added: -MXF: Added copy while ingest support for XT compatible MXF files. Changes 3.1.1.2 --------------- Fixed: - General: Minor fixes and improvements. - Avid: Let Spycer Installer handle ISIS Storage performance read and write settings instead of AvusAvatar installer. Added: Changed: - Avid: Usage of ISIS as destination for folders and for Sync, MetadataSync and Move Jobs is now forbidden, due to be unsupported. The known behaviour may be enforced with held of an avus.ini file with valid settings in installation directory. For further assistance contact service@dvs.de. Proper error messages in Webservice and GUI were introduced. Improved: - Agent: Improved directory scanning in case of filesystem or permission errors. Updated: - General: logwatch version 1.0.14 Changes 3.1.1.1 --------------- Fixed: - General: Minor fixes and improvements. - General: Fixed issues with XDCAM and GFCAM File Ingest Changes 3.1.1.0 --------------- Fixed: - MXF: Fixed problem with audio files with more than 32 audio channels. Added: - General: Copy-while-Ingest can be turned off in Job config. - Added: Mac address based network interface selection. - Network: Unified configuration for VENICE, VENICE Play and Spycer. - MOV: Added support for alternate interpretation of proprietary 'ACLR' image description extension as YUV Range (set aclr_interpretation=2 in avus.ini to enable). Changes 3.1.0.40 ---------------- Fixed: - General: Minor fixes and improvements. - Fileformats: Improved QuickTime read support. - Fileformats: Fixed rare MXF copy-while-ingest issue. Changes 3.1.0.39 ---------------- Fixed: - Agent: rised max worker threads from 8 to 12. - Agent: made max worker threads configurable. - General: Minor fixes and improvements. - Fixed potential issues with RecordScheduler. Changes 3.1.0.38 ---------------- Added: - Added new setting for max number of scan jobs; default is 1. Fixed: - General: Minor fixes and improvements. Changes 3.1.0.37 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.36 ---------------- Fixed: - General: Minor fixes and improvements. Improved: - Agent: Using improved strategy for Watch folders on SAN. - Agent: Improved performance of refresh directory. - Agent: Parallelized scans resulting frokm a refresh directory. - Agent: Fixed Ghost files in Spycer database after watchfolder switch. Changes 3.1.0.35 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.34 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.33 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.32 ---------------- Fixed: - General: Minor fixes and improvements. - Web service: Fixed rare issues with the Spycer web service - Fileformats: Fixed proxy generation for Sony F5/F55/F65/HDCAM-SR/XAVC-4K-Intra MXF files. - Fileformats: Fixed format conversion with Sony F5/F55/F65/HDCAM-SR/XAVC-4K-Intra MXF files as source. - Fileformats: Fixed issue, that playback of QuickTime Movies seems to jump back or shows a black frame due to illegal/unwanted MPEG-2 start codes, behind the framedata. Changes 3.1.0.31 ---------------- Fixed: - General: Minor fixes and improvements. Improved: - General: added general system stats to spycer logging Changes 3.1.0.30 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.29 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.28 ---------------- Fixed: - General: Minor fixes and improvements. - Agent: fixed missing Volume name display on Windows - Licensing: Spycer was not licensed properly on Venice 3.2 with new licensing. Changes 3.1.0.27 ---------------- Fixed: - General: Minor fixes and improvements. Improved: - Avid: Added possibility to use Pathmapping feature for Avid Appliance - Venice Server dynamic path mapping. Changes 3.1.0.26 ---------------- Fixed: - General: Minor fixes and improvements. Improved: - Agent: Pause for realtime processes is now default: OFF (old installations stay as they are) Changes 3.1.0.25 ---------------- Fixed: - General: Minor fixes and improvements. - MOV: Fixed no image being returned during VDCP slave display for some clips due to legacy QuickTime meta information not being intialized properly. Added - MOV: Added support for DNxHD 444 in QuickTime. - MOV: Added import support for vendorless JPEG in QuickTime. - MOV: Added best effort read support for QuickTime files carrying a zero-entry sync sample table. - MOV: Added read support for QuickTime files with long-GOP essences using multiple sample description entries indicating the same format. - MOV: Added read support for a wider variety of QuickTime files with multi-essence video tracks. - MOV: Added read support for QuickTime files with DV/AVCI multi-essence video tracks. Improved - MOV: Improved accuracy of time scale selected for writing high-frame-rate QuickTime files. - MOV: Improved QuickTime parser to better cope with malformed media handler atoms Changes 3.1.0.24 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.23 ---------------- Fixed: - General: Minor fixes and improvements. -Agent: made browse commands appendable to protect against message flooding. -GUI: added warning when Spycer will be installed without watchfolder configured. -GUI: made browse tasks visible in the Activity Monitor. -Agent: Enabled Metaclip creation for SMDK files. - Fileformats: Fixed interrupting copy-while-jobs of AVCIntra. - Agent: fixed error that shows sometime a false error message after copy-while-ingest job. - Agent: added Progress for copy-while-ingest jobs. Changes 3.1.0.22 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.21 ---------------- Fixed: - Agent: fixed file handle leak when scanning or openening MP4 file format. Changes 3.1.0.20 ---------------- Fixed: - General: Minor fixes and improvements. Improved: - Webservice: Reduced memory usage of Spycer Webservice for the case that too much timeouts occur. Changes 3.1.0.19 ---------------- Fixed: - General: Minor fixes and improvements. - Agent: DVS*2052847 — Enabled Metaclip creation for SMDK files Changes 3.1.0.18 ---------------- Fixed: - General: Minor fixes and improvements. - Avid: Fixed compatibility issue to successfully outgest interplay assets ingested with Venice 2.8 and earlier Improved: - Fileformats: Improved reading audio for MXF OP1A with a framerate of 29.97/59.97. Changes 3.1.0.17 ---------------- Fixed: - Record Scheduler: Input aspect ratio is now sent with the FIMS job. - Avid: Some Interplay assets are shown with invalid resolution information in browser Improved: - GUI: Avid Sequences and Masterclip have different icons now. Signalize not supported asset types with question mark icons (rendered effect, effect, ... ) - Avid: Improved performance and reduced memory usage for AAF sequence transform workflows Changes 3.1.0.16 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.15 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.14 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.13 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.12 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.11 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.10 ---------------- Added: - Wwebservice: added Mac address based network interface selection Fixed: - General: Minor fixes and improvements. Added: - General: Mac address based network interface selection Changes 3.1.0.9 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.1.0.8 ---------------- Fixed: - GUI: Fix for "Spycer positioning shortcuts do not work under MaxOS" - - General: Minor fixes and improvements. Added: Updated: Improved: - Fileformats: Improved OpAtom metaclip detection, added new naming schema (DVS*2050525) Changes 3.1.0.7 ---------------- Fixed: - General: Minor fixes and improvements. - General: Showing correct end timecode when opening XDCAM HD via metaclip. Improved: - Agent: Improved scanning of OPAtom files Added: - Agent: Added anc data transfer during convert and proxy creation - GUI: FIMS client service filtering for BXF automation. - GUI: FIMS client alerts on new BXF automation messages. - General: Added AFN100 proxy format Changes 3.1.0.6 ---------------- Fixed: - General: Minor fixes and improvements. Improved: - General: improved archive/native proxy configuration Changes 3.1.0.5 ---------------- Added: - General: Added new manual for software version 2.9.1 Improved: - GUI: Search mask rearranged and improved Fixed: - General: fixed some decoding issues for GFCAM fileformat. - Webservice: fixed recognizing ContentSetProperties is finished. - GUI: Added local path mappings configuration GUI Changes 3.1.0.4 ---------------- Added: - General: Ikegami GFCAM Fileformat, metaclip creation, file ingest, metadata extraction and edit Improved: - GUI: Search mask rearranged and improved Fixed: - General: Minor fixes and improvements. Changes 3.1.0.3 ---------------- Added: - Webservice: Add overwrite flag for rename job. The flag is optional. Default is 'don't overwrite' (job will fail if the target file exists already). Note: This changed the default behavior. Before the job was just pausing, but uncontrollable via webservice API. Fixed: - GUI: drag and drop as well as copy and paste item list order is now the same as it is visible. Improved: - Agent: increased generic logfile size from 2MB to 8MB Changes 3.1.0.2 ---------------- Fixed: - General: Minor fixes and improvements. Improved: - GUI: Raised selection limit from 50 to 300. Added: - Agent: added parameter destination dir for create metaclip function (works only with webservice) - General: Added support for editing AS11 descriptive metadata - General: Added support for MXF XAVC format. Changes 3.1.0.1 ---------------- Added: - General: Added correct path handling for offline Proxies so that they will be used as preview source. - Agent: Made proxy jobs run in parallel to copy jobs. Fixed: - General: Minor fixes and improvements. Changes 3.1.0.0 ---------------- Added: - General: Added LTO tape drive operations for mount, eject and format. - General: Added proxies for offline (archived) files. - General: Create proxies is now available for directories of the filesystem as well as for the virtual archive tree. - Agent: Create all missing offline proxies during archive operation. Use preview proxies when they exist. - Agent: Detect potentially growing files before copying. During the file is growing it will not be copied but the copy job will wait until it is not growing anymore. - GUI: Make the closed caption window resizable. - GUI: "Copy to folder" via context menu (opens a dialog same as the "move to folder" funcionality.) - GUI: Added history for last selected folder. - Agent: Added timecode scanning for container files in unwatched directories. - Agent: Added email notification when SpycerAgent ended unexpectedly (linux only) Fixed: - General: Minor fixes and improvements. Improved: - Fileformats: Improved decoding performance AVI format with v210 raw video data - Fileformats: reduced memory usage. Changes 3.0.0.11 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.0.0.10 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.0.0.9 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.0.0.8 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.0.0.7 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.0.0.6 ---------------- Fixed: - General: Minor fixes and improvements. Changes 3.0.0.5 ---------------- Added: - GUI: Context menu "Start archiving..." to select the desired archive location and start the archiving process. On linux /media/tape1/ will be pre-selected. Fixed: - Agent: fixed list of 'skipped files' in any cases for archiving process if the essence does not exist anymore at all. - Agent: fixed file system info of source for archiving process. - Agent: allow to use multiple tape drives in parallel. - Agent: using 'no buffering' flag for archiving process if source filesystem supports DMA transfers. Changes 3.0.0.4 ---------------- Added: - General: Added search inside archive database. - General: Added search for metadata Archive Barcode and Archive Volumename. - General: Added tool dvslto for mounting, formatting and ejecting LTO-5 tapes. - General: Added special archiving process to copy job. It will auto mount and format the corresponding LTO-5 tape and set the metadata of the tape in the archive database. - General: Recognizing most common Windows 8 variants. - Agent: Added xdcam ingest from multiple xdcam devices in parallel. Improved: - Agent: Increased transwrapping speed into Avid ISIS/Interplay. - Agent: Increased parallelism for copy jobs from or to Avid ISIS/Interplay. - Agent: Added QoS layer for the source storage to transwrapping into Avid ISIS/Interplay. Fixed: - General: fixed wrong audio duration of metaclips containing P2 spanned clips. - Agent: Improved browsing of formerly empty directories. - Agent: respect fieldmode of source files in all cases during transwrapping/file ingest into AVID ISIS/Interplay. - Agent: fixed recognizing filsystems mounted via fuse driver as LTFS by accident. Changes 3.0.0.3 ---------------- Fixed: - General: Minor fixes and improvements. Added: - GUI: Cancel and Stop button for the Venice Record Scheduler. Improved: - GUI: improved view for jobs in the Venice Record Scheduler. Changes 3.0.0.2 ---------------- Added: - GUI: FIMS client for Venice Record Scheduler. - GUI: New Venice Record Scheduler user interface. Changes 3.0.0.1 ---------------- Added: - General: Import folders and subtrees into archive database. - GUI: support of waveform, 3dlut view and playback of content from archive database if original content is still present. Changes 3.0.0.0 ---------------- Added: - General: First version with distinct archive database and its subtree. - General: creating arbitrary new subfolders within archive database. - General: creating new archive volumes in archive database. - General: Renaming and Deleting of folders and archive volumes. - General: Import of single files into archive database. - General: Deleting of files from archive database. - General: Properties for archive database folders and content (count and size). - GUI: Preview of clips within archive database. - General: Support of Mac OS X "Mountain Lion" (10.8)